Blast freezer room Metos Ready RCSL-181-R-PFO

With Metos Ready RCS you immediately have available the optimal technologies and solutions to meet every request, optimize inventory and purchases, reduce waste, and make your work easier, gaining time and opening new opportunities for you. The Ready cold rooms make the most of the available space, in the most diverse situations: from the laboratory to the canteen, to the cooking center, to the restaurant. Compatible with all laboratory or oven trolleys, they have been tested in compliance with the EN17032 standard, even with large loads and in the most demanding work situations.

Thanks to the optimization of the airflow, the result of in-depth research and numerous tests to obtain maximum results. Ready cells have achieved a significant increase in the quantity of product blast chilled and equally sharp reduction in the length of the work cycles. All this with significant energy savings: an advantage for the environment as well as for the budget.

STRUCTURAL CHARACTERISTICS:
AISI 304 stainless steel panel construction with 80 mm-thick polyurethane foam insulation, Stainless steel exterior (Scotch-Brite satin finish),Copper-aluminium evaporating coil, cataphoresis-painted with non-toxic epoxy resin, installed on the side, together with fairing that can be opened via a special safety key for easy and proper maintenance; all PED and UL-tested at a pressure of 30 bar. Highly ventilated evaporator to ensure the cooling system's maximum efficiency. Anti-condensation heating element fitted under the door seal. Door with a rubber sweeper seal, complete with closing hinges. Control-activated chamber sanitization system with active ions (HI-GIENE) (optional) Access ramp equipped with a liquid-collecting grille and filtering system. External bumper to protect the control panel. Recessed or above-floor installation possible. Set up as standard for R452A refrigerant fluid. Cell fitted with easy-to-clean rounded corners and AISI 304 30/10 stainless steel internal bumpers. All the surfaces, body's metal components and internal reinforcements are made of AISI 304 stainless steel and have been tested to withstand a saline environment for at least 800 hours.
Easy-to-clean interior, thanks to the suspended evaporator that quickly removes the washing water, according to the indications of the NFS and UNI EN 14159 standards. Cooling capacity expressed at evaporation temperature -25 °C and condensation temperature at + 45 °C.

EQUIPPED INTERIOR:
Thick stainless steel internal bumper to prevent any trolley-related damage. Quick-release heated core probe with 4 measuring points.

COMMANDS, CONTROLS AND SAFETY DEVICES:
Connectivity (optional)
USB connection for uploading and downloading data/recipes 5" high-definition TOUCH display is easy to use Automatic storage at the end of the blast chilling cycle Electrical connections at the front of the padlocked panel Quick-release heated core probe with 4 measuring points

- 1 door
- Air-cooled condensing unit
- Trolleys capacity n. Tot. 1x GN 1/1 - EN1
- cooling capacity 90 kg (90min/+90…+3°C)
- freezing capacity 50 kg (240min/+90…-18°C)
- Access ramp not included in the price
- Working temperature +3 / -32 °C
- Options: Extra cost
- Left hinged door PSC
- ramp for 181, RCSG-01
- Disassembled delivery 181-182
- Special voltages and frequencies on request.
- Immediately ready to use, because they are equipped with a complete refrigeration unit: an advantage that makes the difference, together with performance, high load capacity, speed of cycles, reduction of consumption and high quality of materials. Just plug them into the power supply and the Ready cells change the way you work for the better.